UI: Frequency Control
There are many ways to change the frequency of your radio using the HMI. Learn about them all here!
UI: The Rotary Encoder
Learn how to use the multi-function rotary encoder for more than just tuning the radio's frequency!
UI: Band Selection
Easily switch bands and change the selected radio's CAT protocol Learn more here!
UI: Modes and Settings
Setting the radio's mode is only the start. Learn about operating modes and their Settings pages here.
UI: Favorite Frequencies
Do you know that every radio port has 100 favorite frequencies? Learn how to manage them here!
UI: Transmit Enable
Control when the HMI allows your radio to transmit using the Tx Enable button.
UI: Configuration and Levels
Learn the fine points about configuring CTR2 and setting levels for each radio port.
UI: Flex Radio Control
The Flex Radio 6000 Signature Series radios are great but they need a tuning knob! See how CTR2 does it!
UI: Icom PCR-1000 Radio Control
In this post I'll discuss the Icom PCR1000 interface built into CTR2.