CTR2-Mini is evolving into a full featured ecosystem. The CTR2-Mini+ provides the hardware to convert the Seeed Studio Wio Terminal into a complete, easy to use radio controller system. New products add even more functionality to your CTR2-Mini+.


AVAILABLE FOR PURCHASE


The following is a summary of the items available for purchase. Several items have been discontinued due to lack of interest. Use the order from at the bottom of this page to submit an order. If you have any questions, contact me.

NOTE: The cables you receive may look different than those shown in the photos below due to the availability of raw stock but they will function as required.


ASSEMBLED UNITS

DESCRIPTION

PRICE (USD)

CTR2-Mini-PLUS-ASSM
Fully assembled and tested CTR2-Mini+
radio controller. Includes a programmed
Wio Terminal with the eRPC firmware
update and a micro-SD memory card.
Order radio interface cables separately.
$150.00

CTR2-Mini-IO-MUX-ASSM
Fully assembled and tested CTR2-Mini
I/O Multiplexer with four Radio I/O ports.
Contact me for 2 and 3 port pricing.
Discontinued

CTR2-Mini-AUDIO-CTRLR-ASSM
Fully assembled and tested CTR2-Mini
Audio Controller allows you to share
two microphones, headphones, and PC
sound card with all of your radios.
Requires a CTR2-Mini Audio I/O
module on each radio.
Discontinued

CTR2-Mini-AUDIO-IO-ASSM
Fully assembled and tested CTR2-Mini
Audio I/O module. Required for each
radio when using the CTR2-Mini Audio
Controller. Replaces the CTR2-Mini
Radio I/O module.
Discontinued

CTR2-Mini-RADIO-IO-ASSM
Fully assembled and tested CTR2-Mini
Radio I/O module.
NOTE: New modules use jumpers
instead of the DIP switch shown.
$20.00

RADIO INTERFACE CABLES

DESCRIPTION

PRICE (USD)

FT8X7DIN8
6 foot cable connects the Mini to the the
Yaesu FT817, FT857, or FT897 CAT port
using an 8-pin Mini-DIN connector. Built
with a stereo 3.5mm male on one end and
a 8-pin Mini-DIN on the other.
$18.00

PTTKEY6
6 foot cable with a 3.5mm (1/8″) stereo plug
that splits the Mini’s PTT/Key Outputs to
separate 3.5mm plugs. A 3.5mm jack is
provided for PTT that must be wired to your
radio’s auxiliary connector.
$18.00

PTTKEYDIN8
6 foot cable with a 3.5mm stereo plug that
splits the PTT/Key Output on the Mini to an
8-pin Mini-DIN plug for PTT and a 3.5mm
stereo plug that connects to the Key input
on the radio. This cable fits the Xiegu G90 or
X5105.
$18.00


PTTKEYFLEX6
6′ splitter cable with a 3.5mm stereo male
that connects the PTT/Key jack on the Mini
to an RCA connector that plugs into PTT
on the Flex and a 3.5mm stereo plug to
connect to the Key input on the radio.
$18.00

RS232FF6
This is a 6 foot cable for radios with an RS232
DB9-Male CAT port such as the Yaesu
FTdx101. It includes a 3.5mm male plug that
connects the CAT I/O port on the Mini to the
DB9-Male on the radio. It includes a female/
female null modem adapter to roll the TD
and RD pins.
$18.00

RS232FM6
6 foot cable for the Icom PCR1000 receiver
and other radios that use a DB9-female
RS232 CAT connector. It includes a 3.5mm
male plug that connects the CAT I/O port on
the Mini to the DB9-Female on the radio. It
includes a male/female null modem adapter
to roll the TD and RD pins.
$18.00

STEREOMM6
6 foot cable with a 3.5mm (1/8″) stereo
plug on each end. Used to connect the
Mini’s CAT or Key/PTT Out to various
radios.
$7.50

HOW TO ORDER


If the options on the order form don’t match your needs, or you’re not sure what you need to order, just describe what you’re looking for in the ADDITIONAL INFORMATION field on the form below and submit the order form. I’ll get back with you to discuss your needs. You can also contact me directly if you have any questions.

Make sure your email address is correct and enter your shipping address in the Additional Information field if it different than what’s listed in QRZ.com.

Enter the quantity of each item you want to order in the fields below.

I will respond to your order email with a quote for the total cost including shipping. Shipping costs vary depending on what you order and your location. I will fill orders on a first come, first served basis. Parts availability has, and may continue to cause unexpected delays. I keep a limited number of PCBs in stock so these generally ship immediately.

Complete units are custom built as they are ordered so it may take a few days for yours to ship depending on the number of units ahead of yours and parts availability. I will keep you posted on your unit’s progress.

No payment is required until I have your items ready to ship. At that time I’ll email you an invoice for payment. Once payment has been received (and cleared if paying by personal check) I’ll mail your order via USPS and email you the tracking number.

I accept PayPal or personal checks drawn on a US bank for the exact purchase price. Please specify which your prefer on the order form. PayPal fees will be added to the quote if you specified this payment method. PayPal fees are 3.5%.

NOTE: To make sure my emails don’t get sent to your spam/junk folder, add my email address to your email white list.

Use the [Tab] key to move to the next item on the order. Pressing [Enter] will submit the order.

Once you click Submit the form will clear and a message will appear showing the status of your order submittal.

You may cancel your order at any time prior to the ship date. Just send me an email to cancel.

Please note the following:

The CTR2-Mini+ does not come with an external Radio I/O module. You can control one radio using the internal radio I/O circuit in this unit. If you want to control multiple radios using a manual RJ45 switch as shown in this post, order one Radio I/O module for each radio and remove the jumpers on the internal radio I/O circuit in the Mini+.




    ===========================================================================================================