November 13, 2026
CTR2-Dial firmware release v3.00.00
----------------------------------------------

IMPORTANT:
Starting with v3.00.00, CTR2-Flex firmware has been renamed to CTR2-Dial. This change aligns the firmware with the CTR2 units based on the M5Dial from M5Stack. Within the firmware, the old "CTR2-Dial MIDI mode" has been renamed to just "MIDI mode", and the old "CTR2-Flex WiFi mode" has been renamed to just "Flex mode".

Also starting with v3.00.00, CTR2-Dial Flex mode supports CTR2 Relay in AetherSDR. In AetherSDR v26.10.4 and above, navigate to  Settings -> Controllers -> CTR2... then select the M5Dial device and press the Start button.

----------------------------------------------

This zip file contains the CTR2-Dial_v30000.bin firmware. It is used to flash the CTR2-Dial firmware to CTR2-Uno, CTR2-Duo, CTR2-Quad, and the older CTR2-Dial and CTR2-Flex hardware. CTR2-Dial support both MIDI mode and Flex mode, just as previous CTR2-Flex firmware did.

Windows and Mac users can use ESPConnect, a browser based flash download tool. The CTR2-Flex and CTR2-Dial manuals have been updated with information on using this new tool.

The CTR2-Flex_install.sh file is a script that you can use to install the firmware on your M5Dial based CTR2 controller without the need of the EspressIF Flash Download tool. This file is most useful on Linux and Mac PC. 

>>> If you use the script file remember to make it an executable file. <<<

To download these files to your device, extract them into a folder then use the instructions in Appendix A: Install or Update CTR2-Flex Firmware section in the CTR2-Flex or CTR2-Dial Firmware Manuals. 

NOTE
============================================================================================================================================
This version contains both CTR2-Flex and CTR2-Dial firmware, therefore, operation manuals for both firmwares are included in this zip file. There are separate hardware manuals for CTR2-Uno, CTR2-Duo, and CTR2-Quad. The CTR2-Uno and CTR2-Duo manuals can be used with older single and dual-knob CTR2-Dial and CTR2-Flex hardware.
============================================================================================================================================

73, Lynn, KU7Q